Description


SPL4C.1
The SPL4C.1 was the next logical progression in the Bassface SPL component speaker family. Sharing common components with its larger counterparts it has a white woven composite cone with excellent stiffness for great midrange and bass response, a silk dome tweeter with a plethora of fitment hardware along with an advanced crossover network whose characteristics have been perfectly matched to the drivers. This combination delivers clear and accurate sound reproduction and good power handling for such a small driver especially when used with a suitable high pass filter and a subwoofer. The back plate is vented to keep the VC compression and temperature down, increasing power handling. The silk dome tweeters are small enough to fit in place of existing ones in your system or to be installed discreetly. The mounting hardware enables you to mount them flush in the dash, on the dash, angled on the dash or even in the doors or headlining. When installed properly into a suitable panel these speakers will instantly improve a factory sound system, revealing the full spectrum of sound that OEM speakers simply cannot reproduce. Team them up with a decent amplifier to experience best resolution and detail – SPL4C.1 might be small but when used correctly they will still produce convincing results with rich smooth midrange and sparkling accurate highs.

Product Data

  • Bassface SKU: SPL4C.1
  • Product Category: Coaxial & Component Speakers
  • Version : 1
  • Series: Classic
  • Barcode: 617529407274
  • Product Net Weight Grams: 1800
  • Complete Product Pack Weight Grams: 2170
  • Retail Carton H mm: 80
  • Retail Carton L mm: 350
  • Retail Carton W mm: 290
  • Sold As: Kit
  • Disclaimer: Please take care when installing these speakers and be sure to follow the installation guide if applicable. These can be used directly from a Head Unit / Radio but too achieve the Optimum power and Best result our advise would be to run them with the correctly suited Amplifier. If you are uncertain on what Amplifier to use, please ask

Technical Highlights

  • Tech-One White Woven Composite Cone
  • Heavy Gauge Steel Basket
  • Massive Super High Density Ceramic Magnet
  • Multi Layer Aluminium Voice Coil
  • Aerospace Grade Rubber Surround Suspension
  • Highly Musical Silk Dome Tweeter
  • Sibilance Free Bar Type Tweeter Dome Protection
  • 3 Position Tweeter Level Switch -3db / 0db / +3db

Speaker Data

  • Full Speaker System Max Power: 600
  • Full Speaker System RMS Power: 300
  • Single Speaker Max Power: 200
  • Single Speaker RMS Power: 100
  • Speaker Overall Diameter With Lugs mm: 125
  • Speaker Overall Diameter With Grilles mm: 140
  • Speaker Overall Diameter mm: 100
  • Speaker Magnet Diameter Including Magnet Protector mm: 75
  • Speaker Installation Cutout Diameter mm: 90
  • Speaker Grille Depth mm: 20
  • Speaker Overall Depth mm: 48
  • Speaker Mounting Depth mm: 45
  • Speaker Front Protrusion From Mounting Plane mm: 3
  • Full Speaker System Frequency Response Hz: 53-23000
  • Speaker Impedance Nominal Ohm: 4
  • Speaker Sensitivity db 1Wm: 95
  • Recommended Cable: PSC16.2

Tweeter Data

  • Tweeter Max Power Pair: 200
  • Tweeter Max Power Single: 100
  • Tweeter RMS Power Pair: 200
  • Tweeter Impedance Ohm: 2500-23000
  • Tweeter Installation Cutout Diameter mm: 40
  • Tweeter Magnet Diameter mm: 56
  • Tweeter Magnet Weight Oz: 40
  • Tweeter Front Protrusion From Mounting Plane mm: 16
  • Tweeter Mounting Depth mm: 31
  • Tweeter Overall Depth mm: 31
  • Tweeter Overall Diameter mm: 15
  • Tweeter Recommended Cable: PSC18.1
  • Tweeter Frequency Response Hz: 2500-23000
  • Tweeter Sensitivity db 1Wm: 4
  • Tweeter Voice Coil Diameter mm: PSC18.1

Whats In The Box?

  • 2 x 4″ Mid Bass Drivers
  • 2 x Crossover Unis
  • 2 x 0.75″ Silk Dome Tweeters
  • 2 x Tweeter Surface Mounts
  • 2 x Tweeter Flush Mounts
  • Screw Pack With Mounting Hardware
  • 4 x 1m Lengths of Wire With Spade Terminals on 1 End
  • 2 x 3m lengths of Basic Speaker Wire